E6013
General Fabrication and RepairsFor mild steel projects, including brackets, gates, and routine workshop repairs.
1 * ARC250
1 * User Manual of ARC250
1 * 200A Electrode Holder (10 ft)
1 * 300A Ground Clamp (10 ft)
1 * Shoulder Strap
1 * Slag Hammer with Wire Brush
1 * Welding Rod E6013
Estimated Delivery:Nov 29 - Dec 03
For steel repair, maintenance, and fabrication.

Match the electrode to your steel repair, fabrication, or maintenance task.
For mild steel projects, including brackets, gates, and routine workshop repairs.
For steel fabrication and repair when the welding procedure specifies low-hydrogen electrodes.
A versatile electrode option for repair work on steel equipment and assemblies.
Keep E7018 dry and follow electrode instructions. E6011/E7018 packages are sold separately.
SYN current assistance with manual adjustment.




Welding PPE is not included.
Use 230V single-phase power in dry conditions. Follow the manual for circuit capacity, plug, installation, and operating requirements.
No external shielding gas is required for stick welding. Use flux-coated electrodes and suitable welding PPE.
Yes. A compatible torch, argon supply, regulator/flowmeter, tungsten, and suitable filler when needed must be sourced separately.
| Parameter | Units | ARC250 |
|---|---|---|
| Rated input voltage | V | AC230V ±15%, 50/60Hz |
| Rated input power | kVA | 12.6 |
| Welding current range (MMA) | A | 20–250 |
| Welding voltage range (MMA) | V | 20.8–28 |
| Welding current range (TIG) | A | 20–220 |
| Welding voltage range (TIG) | V | 10.8–18 |
| Rated duty cycle | % | 60% |
| No-load voltage | V | 78 |
| Overall efficiency | % | 85% |
| Protection grade | — | IP21S |
| Power factor | — | COSφ = 0.7 |
| Insulation grade | — | H |
| Standard | — | UL60974-1 |
| Dimensions (L×W×H) | in | 14.9 × 5.7 × 9.7 |
| Dimensions (L×W×H) | mm | 380 × 146 × 248 |
| Net weight | lb / kg | 11.5 lb / 5.23 kg |
| Applicable electrode diameter | in / mm | 1/16"–1/5"+ / 1.6–6.0 mm |
| Base Metal | Rod Type | Metal Thickness | Electrode Dia | Amperage Range |
|---|---|---|---|---|
| Carbon Steel / Stainless Steel | E6013 / E7018 / E6011 | 1.6 mm (1/16 in) | 1.6 mm (1/16 in) | 20–60 A |
| Carbon Steel / Stainless Steel | E6013 / E7018 / E6011 | 2.0 mm (5/64 in) | 2.0 mm (5/64 in) | 40–80 A |
| Carbon Steel / Stainless Steel | E6013 / E7018 / E6011 | 2.4 mm (3/32 in) | 2.4 mm (3/32 in) | 60–90 A |
| Carbon Steel / Stainless Steel | E6013 / E7018 / E6011 | 3.2 mm (1/8 in) | 3.2 mm (1/8 in) | 90–140 A |
| Carbon Steel / Stainless Steel | E6013 / E7018 / E6011 | 4.0 mm (5/32 in) | 4.0 mm (5/32 in) | 140–180 A |
| Carbon Steel / Stainless Steel | E6013 / E7018 / E6011 | 5.0 mm+ (3/16 in+) | 5.0 mm+ (3/16 in+) | 180–250 A |
ARCCAPTAIN Welder expressly warrants to all purchasers (“Buyer”) of all new welding and cutting equipment, helmet, and replacement parts (“Goods”) that Goods shall be free from manufacturing defects in materials and workmanship which are discovered within the warranty period, subject to the disclaimers and limitations of the Statement. This warranty is void if the equipment has been subjected to improper installation and testing, improper care, unauthorized repair and modification, or abnormal operations.
We will assume both the parts replacement and repair expense of correcting defects during the warranty period. All warranty periods start from the date of delivery and are as follows:
Seller will assume both the parts replacement and repair expense of correcting defects during the warranty period. All warranty periods start from the date of delivery and are as follows:
| MACHINE MODEL | Warranty Time |
| ARC200 | 2 Years |
| ARC160 | 2 Years |
| MIG130 | 2 Years |
| MIG135 | 2 Years |
| MIG145 Pro | 3 Years |
| MIG160 | 2 Years |
| MIG165 | 2 Years |
| MIG165 Pro | 3 Years |
| MIG200 | 2 Years |
| MIG250 | 2 Years |
| MIG200 FIT | 2 Years |
| MIG205MP | 3 Years |
| MIG205DP Pro | 3 Years |
| CUT50 | 2 Years |
| CUT55 LED | 2 Years |
| CUT55 NON-HF | 2 Years |
| CUT55 Pro | 3 Years |
| CUT55 MP | 3 Years |
| MIG205 Pro | 2 Years |
| DC TIG200 | 2 Years |
| AC/DC TIG200P | 5 Years |
| TIG200P | 3 Years |
| TIG205 Pro | 3 Years |
| TIG205P Pro | 3 Years |
| ARC205 Pro | 3 Years |
| ARC165 Pro | 3 Years |
| Used Welding Equipment | 1 Year |
If the items purchased within the scale above become defective due to faulty materials or workmanship within a period of 2 years from the date of purchase, we guarantee to do one of the following, though you may be required to pay shipping costs for the return of the product to us and shipment of the repaired/replaced product to you:
Welding Helmet
Buyer must contact Seller requesting warranty coverage within thirty (30) days from the date the defect is made known to the Buyer at www.arccaptain.com.
Goods are intended for commercial and industrial users who are trained and experienced in the use and maintenance of welding equipment. Buyer's remedies shall be limited exclusively to those provided in this Statement. There are no express warranties other than those contained herein. Seller does not warrant any portion of the Goods not manufactured by Seller or its associates (whether or not specified by Buyer), but Seller shall assign to Buyer upon request all assignable warranties on product of Seller's suppliers related to such Goods. Seller does not warrant that it or the Goods are in compliance with any entity, organization or industry standards, guidelines, or procedures unless specifically contained in a writing signed by Seller.
Warranty Email:support@arccaptain.com
Buyer is responsible for shipment to and from the Seller’s warehouse, or a service facility authorized by Seller. More detail about return policy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
Please Read The Return Policy Here.
Once we have approved your return request, we will start the refund process.
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. You can always contact us for any return question at support@arccaptain.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
European Union 14 day cooling off period
Notwithstanding the above, if the merchandise is being shipped into the European Union, you have the right to cancel or return your order within 14 days, for any reason and without a justification. As above, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at support@arccaptain.com.
It can weld carbon steel, stainless steel, copper, cast iron, and nickel alloys, with a working thickness of 2–16mm (1/12”–5/8”).
Yes. It runs on 230V single-phase power, suitable for most home garages and workshops.
Yes. It features adjustable Arc Force and Hot Start, providing fast, stable arc ignition with minimal sticking, even for beginners.
The machine delivers up to 250A output with a 60% duty cycle, suitable for both light and heavy-duty welding tasks.
Compatible with: E6013/E7018/E6011/E6010 stick welding rods.
Yes. It weighs only 11.5 lbs, and comes with a carry handle and shoulder strap, making it easy to transport.
1 x MMA Welder Unit
1 x 200A Electrode Holder (10 ft)
1 x 300A Ground Clamp (10 ft)
1 x Shoulder Carry Strap
1 x Chipping Hammer with Wire Brush
10 x E6013 3.2mm Welding Rods