An ArcCaptain portable welding machine in red and black, shown on a white background with a 'FREE GIFT' graphic overlay in the top right corner.
A cut50 plasma cutter in use on metal sheets with bright sparks, under the headline 'One Cutter, Two Voltages.' Two inset panels at the bottom show cut metal samples and feature callouts for 110V garage-ready power and 220V full cutting power.
An infographic comparison graphic for a  CUT50 Plasma Cutter versus an Angle Grinder. The left side features a red and black LUGCOPOR plasma cutter, and the right side features a gray angle grinder, under the heading 'A Better Way to Cut Metal'.
CUT50 Plasma Cutter Dual Voltage HF Start Cutter
CUT50 Plasma Cutter Dual Voltage HF Start Cutter

Arccaptain CUT50 HF Start Portable Plasma Cutter 220/110v

Translation missing: en.products.product.price.regular_price $179.99
Translation missing: en.products.product.price.sale_price $179.99 Translation missing: en.products.product.price.regular_price $249.99
Save $70.00
Machine Guide
Note: Multiple items in one order will be shipped separately.
payment icon
  • Estimated Delivery:Nov 27 - Dec 01

    • Free Fast Shipping On orders over $100
    • Experience peace of mind with our trusted logistics services.

Arccaptain CUT50 HF Start Portable Plasma Cutter 220/110v

Translation missing: en.products.product.price.regular_price $179.99
Translation missing: en.products.product.price.sale_price $179.99 Translation missing: en.products.product.price.regular_price $249.99
cut50 led display

Wide Range of Materials

Review Videos for Plasma Cutter CUT50

FAQs

Is the CUT50 a good plasma cutter for beginners?

Yes. The CUT50 is a practical starting point for garage repairs, DIY metal projects, and light fabrication. Its straightforward controls and portable design make it easy to move between jobs. Start on scrap metal to dial in your settings and travel speed before cutting your project pieces.

Can I use the CUT50 on household power?

The CUT50 supports 110V/220V input. Use 110V for lighter cutting jobs or 220V for higher output and thicker material. Check the manual’s circuit requirements before plugging in—a matching plug alone does not mean the outlet can supply enough power.

Do I need an air compressor or gas cylinders?

You’ll need an external air compressor supplying clean, dry air. Oxygen and acetylene cylinders are not required. Match the compressor’s airflow in CFM to the cutter’s operating pressure in PSI

What metals can I cut with the CUT50?

The CUT50 cuts conductive metals such as mild steel, stainless steel, aluminum, and copper. Cutting capacity varies by material, so use settings suited to the metal you’re working with. It does not cut nonconductive materials such as wood or plastic.

Does the CUT50 have a non-touch pilot arc?

No. The CUT50 uses HF contact starting with a PT31 torch, rather than a non-touch pilot arc. Follow the manual’s starting procedure and prepare a clean contact area on the workpiece. If non-touch starting is a priority, choose a model specifically listed with that feature.

Can the CUT50 replace an angle grinder?

For cutting sheet metal, curves, and custom shapes, the CUT50 offers an alternative to cut-off wheels. Keep your angle grinder for grinding welds, beveling edges, and final cleanup. The tools complement each other in a garage or fabrication shop.

Portable plasma cutter praised for cutting through 1/4" to 1/2" steel "like butter." Customers said it's compact, lightweight, and excellent value. Works on 110v and 220v (220v recommended for thicker material). Some noted short duty cycle with heat buildup. Minor concerns about consumable wear and missing voltage/pressure charts, but overall "exceeds expectations."

  • Cutting 1/4 thick plate like its butter...This is a game changer for my little shop.
  • You get way more than you pay for with this machine!!
  • Cuts very smoothly. Saves me a lot of time.
Steel (positive)Shipping (positive)Machine (positive)Shop (positive)Setup (positive)
  • 5 stars: 313 (88%)
  • 4 stars: 33 (9%)
  • 3 stars: 8 (2%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
B
Burksgarage
Super nice to have the Cut 50 in the garage

It is super nice to have the cut 50 around the shop! Perfect to cut down on the grinder time!

C
Chris V.
Great product

Great product. Have the 160 arc aswell. Compact nice unit. Look forward to a tig unit oneday

W
Weld218
Been wanting a plasma cutter for years,

Been wanting a plasma cutter for years, just a stand alone machine, I have all except the tig, and this machine is well worth the price, glad I pulled the trigger on it

R
Randal W.
Great cutting machine!

Awesome cutting machine. It's so simple to use and makes greats cuts on 1/4" & 1/2" steel. Just follow the recommended settings for amperage and air pressure that are on the website. What little slag was there chipped right off with a slag hammer. Should have bought this sooner.

D
Dustin S.
Super nice machine so far

Super nice machine so far. Will definitely be trying other products. Cuts way better than expected.

J
Jamie W.

Works?as it should. We'll worth the money. Will do business again

J
Joseph J.

Very happy with the cut 50. I was supersized that it works as good as a big $ plasma cutter. Only think I did not like was I dont understand why it does not come wit a air line fitting on the back instead od a barb fitting.🤔

t
tom g.

So far this thing works amazing for the price. I cut 1/4¡± using 240v with not a huge compressor and worked awesome. This is also coming from someone who uses high end stuff as well and it does great and the price you can¡¯t beat it

B
Benjamin H.

Works great

A
Andy W.

Amazing unit

J
Jeff B.

Everything went fine, haven’t used it yet . Hope it works like it did in video!

J
John S.

Havent used yet
Look forward to do
N try other equipment you all sell
Thank you
Sincerely
John Sushchyk
Sterling,Massachusetts
United States of America

T
Tara

I can confidently say that this plasma cutter has exceeded my expectations. Its efficiency has more than compensated for its price.

J
Justine

This plasma cutter, while functional, could benefit from design improvements.

T
T.Pool

Pros:
Super simple setup
Easy connection.
Plenty of media on the web to help beginners.
Long leads.

Cons:
no bag included for leads and accessories when transporting.

Personal experience
Cut through 1/4 mild plate steel super easy.

M
Mona

there's no drag tip provided, nor any guidance on where to purchase one. As a unit aimed at beginners, the lack of comprehensive usage instructions is notable.

C
Carl J.
Haven't really had a chance to use it yet bought

Haven't really had a chance to use it yet bought it a couple weeks ago but did not come with a chart to cut voltage and air pressure for the cutting we'll see if they send me one I emailed them but I think I'm going to like it yes I'm a rookie