Arccaptain CUT65MP NON-HF CNC Plasma Cutter
- Move from Handheld Cuts to CNC Projects — Includes a handheld torch, a 2-pin arc-voltage connection, and a 5-pin control interface for integration with compatible CNC tables. CNC machine torch sold separately.
- More Cutting Power on 240V — Delivers up to 65A on 240V for 3/4" clean cuts and up to 1-1/4" maximum severance in mild steel. Use 120V for cutting at up to 35A.*
- Start Without Touching the Metal — Non-HF pilot arc ignition starts without tip contact and helps establish the arc on rusty or painted metal.
- Cut Metal, Remove Rust, and Gouge Welds — Switch between standard cutting, expanded-metal cutting, rust removal, and plasma gouging. Two gouging nozzles are included for removing unwanted weld metal.
- Adjust Settings Without Walking Back — App control lets you change settings remotely. A large display keeps settings and air-pressure information easy to read, while 4T mode lets you make longer cuts without continuously holding the trigger.
1 × CUT65MP Cutting Machine
1 × Air Compressor Filter (Pre-installed on machine)
1 × IPT60 Cutting Torch & Accessories
1 × 300A Ground Clamp
1 × Gas Hose
2 × Hose Clamps
1 × Shoulder Strap
1 × CUT65MP Operator’s Manual
1 × Power Adapter Cable
1 × Control Signal Cable
-
Estimated Delivery:Nov 22 - Nov 26
-
- Free Fast Shipping On orders over $100
- Experience peace of mind with our trusted logistics services.
Cuts All Conductive Metals
Precision Cutting with CNC
Connect to a compatible CNC table to cut brackets, signs, and custom parts
Tested by Real Welders
More Ways to Work Metal
Product Specifications
FAQs
Yes. The CUT65 MP comes with an IPT60 handheld torch for repairs and fabrication, plus a CNC interface for compatible cutting tables. You can start with handheld work and add a CNC setup later for brackets, signs, and repeat parts. A compatible CNC machine torch is sold separately.
You’ll need a compatible CNC table and controller, a machine torch such as the Arccaptain IPTM60, and the correct interface cables. The CUT65 MP provides a 2-pin arc-voltage connection and a 5-pin control interface. Confirm wiring, signal requirements, and torch-height-control compatibility with your table manufacturer before connecting.
Yes. The CUT65 MP supports 120V and 240V input, delivering up to 35A on 120V or 65A on 240V. Use 120V for lighter repairs and 240V for thicker material. Check the manual’s circuit requirements first—a plug adapter does not increase the power available from your outlet.
The CUT65MP can cut a variety of metals, including carbon steel, stainless steel, copper, cast iron, and aluminum.
120V mode: Normal cutting up to 10mm, maximum 15mm
240V mode: Normal cutting up to 18mm, maximum 32mm
For thicker plates, use 50–60 psi air pressure and reduce cutting speed to improve cutting quality.
Gas pressure range: 0.2–0.5 Mpa (29–72 psi).
Recommended operating pressure for standard cutting, gouging, or rust removal: 0.4 Mpa (57.5 psi). Fine adjustment within the range can be made depending on material thickness and working mode.
The CUT65 MP starts the pilot arc without touching the torch tip to the metal and without high-frequency ignition. This helps establish the arc on rusty or painted surfaces and avoids high-frequency starting interference—a useful feature for compatible CNC setups. Proper grounding and cable routing still matter.
Yes. Expanded-metal cutting mode helps maintain the arc as the torch crosses gaps, reducing repeated restarts on mesh and grating. Select the appropriate mode and adjust settings for the material. This is useful for making guards, screens, and replacement panels.
Yes. Plasma gouging removes unwanted weld metal without cutting all the way through the workpiece. It’s useful for removing old welds around brackets or preparing a repair for rewelding. Select gouging mode and fit compatible gouging consumables before starting.
The CUT65 MP offers up to 65A on 240V and a CNC interface for compatible cutting tables. The CUT55 MP offers up to 55A on 240V and is designed for handheld work. Choose the CUT65 MP if you need more cutting output or plan to add CNC capability.
For the included IPT60 handheld torch, choose compatible IPT60 consumables matched to your amperage and task. Cutting and gouging use different consumables. If you add an IPTM60 CNC torch, check its specified parts and current rating before ordering or setting the machine’s output.