ARCCAPTAIN CUT55 Pro 55A Plasma Cutter Advanced Kit with Helmet & 24 AG60 Parts
Full 55A Cutting Output: Use 240V for full output and clean cuts up to 1/2 inch.
Dual-Voltage Work Flexibility: Use compatible 120V or 240V power across different work locations.
Non-Contact Pilot Arc: Start cuts on rusty, painted, or dirty metal without touching the torch tip.
Basic Operator Protection: The included welding helmet provides eye and face shielding during plasma cutting.
Twenty-Four Spare Torch Parts: Extra AG60 parts keep routine replacement items available when existing parts wear.
-
Estimated Delivery:Sep 22 - Sep 26
-
- Free Fast Shipping On orders over $100
- Experience peace of mind with our trusted logistics services.
The CUT55 Pro Advanced Kit combines the dual-voltage pilot arc plasma cutter with a welding helmet and a 24-piece AG60 torch parts pack.
The machine delivers up to 55A on 240V and up to 35A on 120V. Its non-contact pilot arc helps cut rusty, painted, dirty, or coated conductive metal without touching the torch tip to the workpiece.
The helmet adds basic eye and face shielding, while the additional AG60 parts provide replacement wear items for regular cutting and maintenance.
External Equipment Required: A clean, dry air compressor rated at least 90 PSI, 5 CFM, and 10 gallons.
Bundle Highlights
- Full 55A Cutting Output: Use 240V for full output and up to a 1/2-inch clean cut.
- Flexible 120V Or 240V Power: Match the input voltage to available power and job requirements.
- Non-Contact Pilot Arc: Start cuts on rusty, painted, or dirty metal without touching the torch tip.
- Basic Operator Protection: The included helmet adds eye and face shielding during plasma cutting.
- Twenty-Four Spare Torch Parts: Extra AG60 parts keep replacement wear items available for routine maintenance.
What's included?
| Included Item | Purpose |
|---|---|
| 1 × CUT55 Pro Plasma Cutter | Provides up to 55A output on 240V and up to 35A on 120V. |
| 1 × Preinstalled Air Compressor Filter | Helps reduce moisture and contaminants entering the torch air supply. |
| 1 × AG-60 Cutting Torch with Accessories | Directs the plasma arc for handheld cutting with compatible AG60 wear parts. |
| 1 × 200A Ground Clamp with DKJ 10-25 Connector | Completes the electrical cutting circuit through the conductive workpiece. |
| 1 × Gas Hose | Carries compressed air from the external compressor to the cutter. |
| 2 × Hose Clamps | Secure the air hose at its connection points. |
| 1 × 240V-to-120V Voltage Adapter | Supports connection to compatible 120V power when required. |
| 1 × Carry Strap | Helps carry the 11.5 lb cutter between work areas. |
| 1 × Operator Manual | Provides setup, operating, and safety instructions for the CUT55 Pro. |
| 1 × Dust Cover | Helps keep settled dust off the stored machine. |
| 1 × Welding Helmet | The helmet helps shield the operator’s eyes and face from arc light, sparks, and hot metal. |
| 24-Piece AG60 Torch Parts Pack | The 24-piece pack supplies replacement AG60 wear parts, helping maintain cutting performance between parts orders. |
CUT55 Pro Technical Specifications
| Specification | Product Information |
|---|---|
| Model | CUT55 Pro |
| Product Type | Dual-Voltage Pilot Arc Plasma Cutter with App Control |
| Input Voltage | 120V / 240V AC, Single Phase, 50/60 Hz |
| Maximum Output | 55A on 240V; 35A on 120V |
| Output Current Range | 20–55A on 240V; 20–35A on 120V |
| Rated Input Capacity | 9.4 kVA on 240V; 5.5 kVA on 120V |
| Cutting Process | Handheld Plasma Cutting with Pilot Arc |
| Clean Cut | 240V: Up to 1/2 in.; 120V: Not separately specified |
| Maximum Severance | 240V: Up to 3/4 in.; 120V: Not separately specified |
| Arc Starting Method | Non-Contact Pilot Arc |
| Supported Materials | Mild Steel, Carbon Steel, Stainless Steel, Aluminum, Copper, and Other Electrically Conductive Metals |
| Torch / Consumables | AG60 Plasma Torch and Compatible AG60 Consumables |
| App Control | Bluetooth App Control for Remote Adjustment and Machine Monitoring |
| Trigger Modes | 2T / 4T |
| Post-Flow Time | 5 Seconds |
| Operating Air Pressure | 29–72 PSI |
| Recommended Air Supply | At Least 90 PSI, 5 CFM, and a 10-Gallon Tank |
| Duty Cycle | 60% |
| No-Load Voltage | 330V |
| Cooling System | Air-Cooled with Smart Fan Control |
| Protection Features | Smart Fan Cooling and IP21S Enclosure |
| Efficiency | 85% |
| Insulation Class | Class H |
| Dimensions | 17.8 × 9.6 × 6.1 in. |
| Weight | 11.5 lb |
| CNC Compatible | No |
| Warranty | 3 Years |
