ARCCAPTAIN Black Friday Deals 2026: Dates & Buying Guide

ARCCAPTAIN’s Black Friday 2026 promotion runs from October 28 through December 4, with Early Bird, Black Friday, and Cyber Monday stages. This guide explains the sale schedule, featured deals, and Early Bird offers, and compares welding and cutting equipment to help you choose a setup for your projects.

When Do ARCCAPTAIN Black Friday Deals Start and End?

ARCCAPTAIN’s 2026 holiday promotion runs in three stages, beginning October 28 and continuing through December 4.

Individual flash deals have separate schedules. Check the selected round’s dates and countdown on the official Black Friday page before ordering.

Featured Black Friday Deals at a Glance

Compare the featured offers below, then use the product descriptions to narrow your shortlist by welding process, portability, or cutting requirements.

Prices reflect the featured promotional listings. Percentage savings are calculated from the listed original prices and rounded to one decimal place. Pricing and availability may change; confirm your selected configuration at checkout.

Featured Black Friday Welder Deals

Choose a welder based on your materials, preferred processes, and workshop setup. These four models offer different reasons to upgrade, from app-supported adjustments to pulse welding and portable operation.

MIG205 Pro Multi-Process Welder: Save $300

The ARCCAPTAIN MIG205 Pro is $499.99, down from $799.99—a saving of $300.

Its multi-process functions include MIG, flux-cored, Lift TIG, Stick, spot welding, and spool gun support. Synergic controls help coordinate welding settings, while app control allows supported parameter adjustments and saved settings. This combination makes it worth considering for a workshop handling varied welding tasks. A spool gun is sold separately, so choose the accessories required for your intended process. 

MIG200P Pulse MIG Welder: Save $140

The ARCCAPTAIN MIG200P is $399.99, down from $539.99—a saving of $140.

Single-pulse MIG is its key distinction in this selection. The machine also supports gas MIG, flux-cored welding, Stick, Lift TIG, and spot functions, with synergic controls that match voltage and wire speed to selected settings. Consider it for a home workshop where pulse MIG and process flexibility are priorities. For aluminum work, match the wire-feeding equipment and shielding gas to the selected configuration. 

MIG165 Portable MIG Welder: Save $50

The ARCCAPTAIN MIG165 is $189.99, down from $239.99—a saving of $50.

At a listed 12.8 lb, it is a portable option for users who need to move equipment around a garage or between suitable work areas. It supports gas MIG, flux-cored, Lift TIG, and Stick welding, with 110V/220V input capability. Synergic MIG settings simplify initial setup, making it a practical model to compare for a first workshop. The Lift TIG torch is sold separately. 

TIG205P Pro DC Pulse TIG Welder: Save $140

The ARCCAPTAIN TIG205P Pro is $279.99, down from $419.99—a saving of $140.

Its functions include HF DC TIG, pulse TIG, Lift TIG, spot TIG, and Stick welding. Pulse and spot options make it a model to consider for controlled work on suitable thin steel and stainless steel projects. Presets provide starting points that still require adjustment for the joint and material. This is a DC model; choose an appropriate AC/DC machine if aluminum AC TIG is your goal. 

Black Friday Plasma Cutter Deals: Save Up to $100

The featured plasma cutter deals cover portable manual cutting, non-HF starting, higher-output equipment, and CNC-focused setups. Your typical material thickness, electrical supply, and compressed-air capacity should guide the choice.

CUT50 HF Portable Plasma Cutter: Save $70

The ARCCAPTAIN CUT50 HF is $179.99, down from $249.99—a saving of $70.

It combines HF starting, 110V/220V input capability, and a portable design weighing approximately 12.8 lb. The supplied PT31 torch makes consumable compatibility straightforward to identify when ordering replacements. Consider it for manual cutting in a budget-conscious home workshop. It requires an external compressed-air supply and is not listed as CNC compatible. Cutting performance depends on the input voltage and operating conditions. 

CUT55 NON-HF Plasma Cutter: Save $80

The ARCCAPTAIN CUT55 NON-HF is $309.99, down from $389.99—a saving of $80.

Non-HF starting, a smart display, and mesh mode distinguish this model within the featured selection. It is worth comparing if your projects include expanded metal or other interrupted cutting paths. Dual-voltage capability provides flexibility between suitable electrical supplies. Match the machine’s rated cutting performance to your workload, and confirm the supplied torch and replacement consumables for your selected package. 

CUT65 HF 65A Plasma Cutter: Save $100

The ARCCAPTAIN CUT65 HF is $469.99, down from $569.99—a saving of $100.

Its 65A output and supplied P80 torch make it an option to compare when moving toward more demanding manual cutting work. The standard package lists a preinstalled air filter, spare nozzles and electrodes, and a shoulder strap. Select it according to the material thickness and duty cycle your work requires; maximum severance capacity should not be treated as the expected clean-cut thickness. 

CUT65MP NON-HF CNC Plasma Cutter: Save $100

The ARCCAPTAIN CUT65MP NON-HF CNC is $599.99, down from $699.99—a saving of $100.

This model adds a CNC interface alongside non-HF starting, app-supported adjustments, and modes for standard cutting, grid cutting, gouging, and rust removal. It is worth considering if you want manual cutting capability with a path toward automated work. The listed package includes a control signal cable and IPT60 hand torch. Confirm table, controller, interface, and machine-torch requirements before building a CNC setup. 

Black Friday Handheld Laser Welder Deals: Save Over $4000

ARCLUME LW1200 1200W Handheld Laser Welder: Save $4,099.01

The ARCLUME LW1200 1200W Handheld Laser Welder is $6,899.99, reduced from $10,999.00—a saving of approximately 37.3%.

Its 1200W laser output and wheeled workstation format make it an option to consider for a dedicated fabrication workspace. The featured offer emphasizes aluminum welding and an integrated mobile setup. If you regularly work with aluminum components, compare the machine’s supported alloys, joint requirements, and material thickness range with your applications before selecting a package. 

ARCLUME AIR 500 3-in-1 Handheld Laser Welder: Save $1,700

The ARCLUME AIR 500 3-in-1 Handheld Laser Welder is $3,499.99, reduced from $5,199.99—a saving of approximately 32.7%.

Positioned for thin-metal work, the AIR 500 is worth comparing when portability and a compact setup are priorities. The featured offer also lists portable power station support, which may provide additional placement flexibility when paired with a suitable power source. Confirm the required continuous output, capacity, and connection specifications before choosing a power station. 

Complete Your Workshop With Accessories and Consumables

Use the promotion to fill practical gaps in your setup. A compatible accessory or supply you regularly use can be as valuable as a machine upgrade.

Welding helmets and protective equipment

Choose a helmet suitable for your process and operating current, with appropriate shade settings and a comfortable fit. Select gloves and protective clothing for the heat exposure and handling demands of the work.

Wire, filler rods, and electrodes

Match consumable classification and diameter to your base material, equipment, and application. Plan quantities around upcoming projects rather than purchasing unfamiliar supplies solely because they are discounted.

Torch parts and plasma consumables

Order replacement parts by exact torch and component compatibility. Check sizes and model references, particularly when comparing kits that look similar.

Equipment bundles

Compare the standard machine package with the bundle’s extra items. A bundle can offer useful value when its additions replace purchases you would otherwise make separately.

How to Choose the Right Equipment During the Sale

Narrow your shortlist before comparing discounts. The following checks help you purchase equipment that fits your work.

1. Define your projects. Identify materials, typical thicknesses, and required welding or cutting processes.
2. Check your available supply. Confirm electrical requirements and, for plasma cutting, compressed-air capacity.
3. Compare capabilities. Review supported functions, output, duty cycle, and operating limits.
4. Calculate the complete cost. Include required torches, consumables, gas equipment, and protective equipment.
5. Review the purchase terms. Confirm the selected variant, final price, delivery information, and applicable warranty and return conditions.

For a replacement machine, you may already own compatible accessories. For a first setup, a broader package may be more practical. Follow the equipment manual when connecting supplies, preparing your workspace, and operating the machine.

Conclusion

Before ordering, compare your preferred machine’s capabilities, included accessories, and total setup cost. Visit the ARCCAPTAIN Black Friday sale page to check the latest prices, available gifts, and offer terms for your selected equipment.

Frequently Asked Questions